INTRODUCTION PRODUCTS SUM Electronics is a manufacturer of high quality, good performance and secure rechargeable lithium-ion battery pack, lithium iron phosphate battery pack to serve the world’s industrial enterprises. Application fields: Instrumentation, robotic, Medical, business and...Send Inquiry
SUM Electronics is a manufacturer of high quality, good performance and secure rechargeable lithium-ion battery pack, lithium iron phosphate battery pack to serve the world’s industrial enterprises.
Application fields: Instrumentation, robotic, Medical, business and Security equipment; Energy storage and emergency backup power systems, etc.
I/ Products specs
I/ Production process
III/ safety performance testing
1. High-low temperature pressure:
Change the temperature between 80±5℃ and 0℃, and simulate pressure of 5 ~ 7T while the battery is molded under extreme temperature and pressure conditions.
2. Temperature cycle:
The battery should be placed separately at least 6h at the temperature of (75±2)℃ and (-40±2)℃ with a 30min free temperature adjustement. Put the testing battery in (20±5)℃ after thermal shock ten times and evaluate the sealing integrity and internal electric connection under a rapidly changing temperature condition.
A round bar weighting around 9.1kgs with a diameter of 15.8 mm is placed to fall on the battery surface from 61±2.5cm of height. An evaluation is done to assess situations that may cause internal short circuits, such as possible impacts or crushing during shipping.
4. Needle test:
Using a press machine with a steel needle of 3-3.5mm diameter, the battery is punched at 10-40mm/s speed and there should be no smoke, no fire, and no explosion after pulling it out. This test helps evaluate an
internal short circuit condition in the battery
5. Vibration test:
The battery is fixed on a vibrating table, within 15min from 7Hz ~ 200Hz ~ 7Hz to complete a logarithmic frequency sweep sinusoidal vibration, 3h within three-dimensional direction to complete 12 vibrations, no leakage, no exhaust, no disintegration, no rupture, no fire should be observed. The vibration simulation is to evaluate the risks during transportion.
6. Drop test:
The battery is dropped from a falling height of 1.5m free fall on the concrete, the battery should not catch fire, nor be short circuited & no leakage should be observed;
Usage of extreme safety is required while testing all batteries.
Packaging: Only the qualified batteries will be packaged for delivery.
1-Q/ Do batteries need to be certified for a sea shipment?
A/ Yes, the UN38.3 sea shipment certification is needed.
2-Q/ What’s the lead time production of lithium battery?
A/ It usually takes 25 to 30 days.
3-Q/ What does batteries in parallel mean?
A/ Batteries in parallel means increasing the capacity while keeping a constant voltage.
4-Q/ What does batteries in series mean?
A/ batteries in series means increasing the voltage while keeping a constant capacity.
5-Q/ which type of lithium battery can be used at a temperature of 80°C?
A/ Lithium polymer battery can withstand a temperature as high as 80°C.
6-How to store lithium batteries?
The polymer Li-ion battery should be stored in a cool, dry and well-ventilated area, and should be far from the fire and the high temperature.
7-What's the highest temperature to reach during battery transportation?
The highest temperature during battery transportation should be lower than 65℃